Hotline: 0899.898086 - 0582.545556
| Brightness: | 10000 ANSI lumens |
| Resolution: | 1.920x1.200 WUXGA |
| Technology: | LCD |
| Light source: | Laser Phosphor |
| Projector type | LCD projectors | |
|---|---|---|
| LCD panel | ||
| Panel size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) | |
| Display method | Transparent LCD panel (x 3, R/G/B) | |
| Drive method | Active matrix method | |
| Pixels | 2,304,000 (1920 x 1200) pixels x 3 | |
| Light source | Laser diodes | |
| Light output*1 | 10,000 lm | |
| Time until light output declines to 50 %*2 | 20,000 hours (NORMAL) | |
| Resolution | 1920 x 1200 pixels | |
| Contrast ratio*1 | 3,000,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]. |
|
| Screen size (diagonal) | 2.03–12.7 m (80–500 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 16:10 aspect ratio | |
| Center-to-corner zone ratio*1 | 85 % | |
| Lens | Optional powered zoom lenses | |
| Lens shift | ||
| Vertical (from center of screen) |
±60 % (±40 % with ET-EMW200, ±50 % with ET-EMW300, +50 %, -20 % with ET-EMU100) (powered) | |
| Horizontal (from center of screen) |
±20 % (±19 % with ET-EMW200) (powered) | |
| Keystone correction range | Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500, ±5° with ET-EMU100), Horizontal: ±15° (±8° with ET-EMW200/ET-EMW300, ±0° with ET-EMU100) | |
| Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500, ±5° with ET-EMU100), Horizontal: ±40° (±8° with ET-EMW200/ET-EMW300, ±15° with ET-EMW400/ET-EMW500, ±0° with ET-EMU100) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. |
|
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD-SDI input | |
| HDMI IN | HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*3) | |
| DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | |
| RGB IN | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| SERIAL/MULTI PROJECTOR SYNC IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | D-sub 9-pin (female) × 1 for external control (parallel) | |
| REMOTE 2 IN | M3 x 1 for wired remote control | |
| REMOTE 2 OUT | M3 x 1 for link control (for wired remote control) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K/60p signal input*3) | |
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DC OUT | USB Connector (Type A) x 1 (Output 5 V/2 A) | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Power consumption | 640 W | |
| Cabinet materials | Molded plastic | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours) | |
| Operation noise*1 | 35 dB (NORMAL) / 30 dB (Quiet) | |
| Dimensions (W x H x D) | 650 x 211*4 x 440 mm (25 19/32˝ x 8 5/16˝*4 x 17 21/64˝ ) (Without lens) | |
| Weight*5 | Approx. 22.3 kg (49.2 lbs) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*6; Operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ | |
| Projector type | LCD projectors | |
|---|---|---|
| LCD panel | ||
| Panel size | 25.4 mm (1.0 in) diagonal (16:10 aspect ratio) | |
| Display method | Transparent LCD panel (x 3, R/G/B) | |
| Drive method | Active matrix method | |
| Pixels | 2,304,000 (1920 x 1200) pixels x 3 | |
| Light source | Laser diodes | |
| Light output*1 | 10,000 lm | |
| Time until light output declines to 50 %*2 | 20,000 hours (NORMAL) | |
| Resolution | 1920 x 1200 pixels | |
| Contrast ratio*1 | 3,000,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]. | |
| Screen size (diagonal) | 2.03–12.7 m (80–500 in), 2.54–10.16 m (100–400 in) with ET-EMU100, 16:10 aspect ratio | |
| Center-to-corner zone ratio*1 | 85 % | |
| Lens | Optional powered zoom lenses | |
| Lens shift | ||
| Vertical (from center of screen) | ±60 % (±40 % with ET-EMW200, ±50 % with ET-EMW300, +50 %, -20 % with ET-EMU100) (powered) | |
| Horizontal (from center of screen) | ±20 % (±19 % with ET-EMW200) (powered) | |
| Keystone correction range | Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500, ±5° with ET-EMU100), Horizontal: ±15° (±8° with ET-EMW200/ET-EMW300, ±0° with ET-EMU100) | |
| Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±40° (±14° with ET-EMW200/ET-EMW300, ±22° with ET-EMW400/ET-EMW500, ±5° with ET-EMU100), Horizontal: ±40° (±8° with ET-EMW200/ET-EMW300, ±15° with ET-EMW400/ET-EMW500, ±0° with ET-EMU100) When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. | |
| Installation | Ceiling/floor, front/rear, free 360-degree installation | |
| Terminals | ||
| SDI IN | BNC x 1: 3G/HD-SDI input | |
| HDMI IN | HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K/60p signal input*3) | |
| DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) | |
| RGB IN | D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR) | |
| SERIAL/MULTI PROJECTOR SYNC IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| SERIAL/MULTI PROJECTOR SYNC OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) | |
| REMOTE 1 IN | D-sub 9-pin (female) × 1 for external control (parallel) | |
| REMOTE 2 IN | M3 x 1 for wired remote control | |
| REMOTE 2 OUT | M3 x 1 for link control (for wired remote control) | |
| DIGITAL LINK | RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K/60p signal input*3) | |
| LAN | RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net) | |
| DC OUT | USB Connector (Type A) x 1 (Output 5 V/2 A) | |
| Power supply | AC 100–240 V, 50/60 Hz | |
| Power consumption | 640 W | |
| Cabinet materials | Molded plastic | |
| Filter | Included (Estimated maintenance time: approx. 20,000 hours) | |
| Operation noise*1 | 35 dB (NORMAL) / 30 dB (Quiet) | |
| Dimensions (W x H x D) | 650 x 211*4 x 440 mm (25 19/32˝ x 8 5/16˝*4 x 17 21/64˝ ) (Without lens) | |
| Weight*5 | Approx. 22.3 kg (49.2 lbs) | |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*6; Operating humidity: 10–80 % (no condensation) | |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ | |
Ý kiến bạn đọc
Tọa Độ:16.804280,107.104673
