Máy chiếu Panasonic PT-RCQ10 Series CHÍNH HÃNG


Mã sản phẩm: PT-RCQ10 Series
Đăng ngày 07-07-2021 11:42:39 AM   30 Lượt xem
Giá bán: Liên hệ

  • Laser 1-Chip DLP, 10,000 lumens (ANSI), WUXGA, 4K Ready* laser projector
  • Rich Colour Harmonizer technology for improved and more accurate colour reproduction
  • Accepts 4K signal input 
  • Projects a 2175x1697 high-resolution image by using pixel shift technology 
  • Maintenance-free up to 20,000 hours maintenance-free operation with dust-resistant optical block and long lasting laser engine

Máy chiếu Panasonic PT-RCQ10 Series CHÍNH HÃNG
 
  • Laser 1-Chip DLP, 10,000 lumens (ANSI), WUXGA, 4K Ready* laser projector
  • Rich Colour Harmonizer technology for improved and more accurate colour reproduction
  • Accepts 4K signal input 
  • Projects a 2175x1697 high-resolution image by using pixel shift technology 
  • Maintenance-free up to 20,000 hours maintenance-free operation with dust-resistant optical block and long lasting laser engine
Projector type 1-Chip DLP™ projector  
DLP™ chip  
Panel size 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio  
Display method DLP™ chip x 1, DLP™ projection system  
Number of pixels 2,304,000 (1920 x 1200) pixels  
Light source Laser diodes  
Light output 10,000 lm*1 / 10,500 lm (Center)*2  
Time until light output declines to 50 %*3 20,000 hours (NORMAL) / 24,000 hours (ECO)  
Resolution 4,608,000 pixels / 2715 x 1697 dots
* With Smooth Pixel Drive: ON.
 
Contrast ratio*1 10,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3].  
Screen size (diagonal) 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio  
Center-to-corner zone ratio*1 90 %  
Lens PT-RCQ10: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
PT-RCQ10L: Optional powered zoom/focus lenses
 
Lens shift*4  
Vertical
(from center of screen)
+50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered)  
Horizontal
(from center of screen)
+30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered)  
Keystone correction range Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035),
Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020)
 
Keystone correction range with optional ET-UK20 Upgrade Kit Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055),
Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055),
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °.
 
Installation Ceiling/floor, front/rear, free 360-degree installation  
Terminals  
SDI IN BNC x 1: 3G/HD-SDI input  
HDMI IN HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5)  
DVI-D IN DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)  
MULTI PROJECTOR SYNC IN BNC x 1  
MULTI PROJECTOR SYNC OUT BNC x 1  
SERIAL IN D-sub 9-pin (female) x 1 for external control (RS-232C compliant)  
SERIAL OUT D-sub 9-pin (male) x 1 for link control  
REMOTE 1 IN M3 x 1 for wired remote control  
REMOTE 1 OUT M3 x 1 for link control (for wired remote control)  
REMOTE 2 IN D-sub 9-pin (female) x 1 for external control (parallel)  
LAN RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net  
DIGITAL LINK RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5  
USB USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA)  
Expansion Slot Open slot for SLOT NX compatible interface board  
Power supply AC 100–240 V, 50/60 Hz  
Power consumption 1,100 W  
Cabinet materials Molded plastic  
Operation noise*1 43 dB (Normal)/40 dB (Quiet 1)/38 dB (Quiet 2)  
Dimensions (W x H x D) PT-RCQ10: 498 x 200*6 x 581 mm (19 19/32˝ x 7 7/8˝ *6 x 22 7/8˝ ) (with supplied lens)
PT-RCQ10L: 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8˝ *6 x 21 3/16˝ ) (without lens)
 
Weight*7 PT-RCQ10: Approx. 24.2 kg (53.4 lbs) (with supplied lens)
PT-RCQ10L: Approx. 23.4 kg (51.6 lbs) (without lens)
 
Operating environment Operating temperature: 0–45 °C (32–113 °F)*8 *9, operating humidity: 10–80 % (no condensation)  
Applicable software Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™
     

 

  Ý kiến bạn đọc

Mã bảo mật   
161 Tôn Thất Thuyết ,P.5, TP.DH, Quảng Trị- Code: 700000

Tọa Độ:16.804280,107.104673

Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây
TOP